Air Sealing a Ceiling Electrical Junction Box
Sealing Air Leaks
Warm air leaking into your home during the summer and out of your home during the winter and can waste a lot of your energy dollars. One of the quickest dollar-saving tasks you can do is caulk, seal, and weatherstrip all seams, cracks, and openings to the outside.
You can save on your heating and cooling bill by reducing the air leaks in your home.
Hint: Use Fire Rated: 5/8″Fire Rated Drywall or Sheetrock with Fire Proof Caulking to
Create the Air Tight Seal
Tips for Sealing Air Leaks
Air infiltrates into and out of your home through every hole and crack. About one-third of this air infiltrates through openings in your ceilings, walls, and floors.
- First, test your home for air tightness. On a windy day, carefully hold a lit incense stick or a smoke pen next to your windows, doors, electrical boxes, plumbing fixtures, electrical outlets, ceiling fixtures, attic hatches, and other locations where there is a possible air path to the outside. If the smoke stream travels horizontally, you have located an air leak that may need caulking, sealing, or weatherstripping.
- Caulk and weatherstrip doors and windows that leak air.
- Caulk and seal air leaks where plumbing, ducting, or electrical wiring penetrates through walls, floors, ceilings, and soffits over cabinets.
- Install foam gaskets behind outlet and switch plates on walls.
- Look for dirty spots in your insulation, which often indicate holes where air leaks into and out of your house. You can seal the holes with low-expansion spray foam made for this purpose.
- Look for dirty spots on your ceiling paint and carpet, which may indicate air leaks at interior wall/ceiling joints and wall/floor joists. These joints can be caulked.
- Install storm windows over single-pane windows or replace them with more efficient windows, such as double-pane. See Windows on page 18 for more information.
- When the fireplace is not in use, keep the flue damper tightly closed. A chimney is designed specifically for smoke to escape, so until you close it, warm air escapes—24 hours a day!
- For new construction, reduce exterior wall leaks by installing house wrap, taping the joints of exterior sheathing, and comprehensively caulking and sealing the exterior walls.
- Use foam sealant around larger gaps around windows, baseboards, and other places where warm air may be leaking out.
- Kitchen exhaust fan covers can keep air from leaking in when the exhaust fan is not in use. The covers typically attach via magnets for ease of replacement.
- Replacing existing door bottoms and thresholds with ones that have pliable sealing gaskets is a great way to eliminate conditioned air leaking out from underneath the doors.
- Fireplace flues are made from metal, and over time repeated heating and cooling can cause the metal to warp or break, creating a channel for hot or cold air loss. Inflatable chimney balloons are designed to fit beneath your fireplace flue during periods of non-use. They are made from several layers of durable plastic and can be removed easily and reused hundreds of times. Should you forget to remove the balloon before making a fire, the balloon will automatically deflate within seconds of coming into contact with heat.
Areas that leak air into and out of your home cost you lots of money. Check the areas listed below.
- Sealing air leaks saves on utility bills (seattletimes.nwsource.com)
- Home Energy Audit Checklist (streetsvillerealestatebuzz.wordpress.com)
- How Energy Efficient Is Your Home? (streetsvillerealestatebuzz.wordpress.com)
- Seal Manufactured Home Air Leaks to Slash Electric Bills (nplains.com)
- Save Money with a Nip and Tuck for Your House (diyornotblog.wordpress.com)
- Its That Time Again… Winterize Your Home! (streetsvillerealestatebuzz.wordpress.com)
- 10 Frugal Ways to Keep Your Home Warm This Winter (wisebread.com)